Pool Black Spot Algaecide (1 litre)

  • Black spot algaecide.
  • Specially formulated to treat clinging algae crusts.
  • Compatible with all sanitisers.
  • Trusted by the trade, used by professionals and commercial entities for over 20 years.
Very effective in treating clinging algae,  particularly Black Spot in all types of pools.
Availability: Out of stock
Highly effective algicide, the Concentrated Black Spot Algae Killer is specially formulated for treating clinging algae, particularly Black Spot, as well as lysing the algae cells. It may be used in all types of pools. Algae is likely to form when sanitisers levels are too low, pH levels are incorrect or in areas of poor circulation. Sometimes algae can build up a resistance to chlorine and other sanitising products. To ensure safe use of your pool, maintain a free chlorine level of between 1.5 - 3 ppm for pools or 3 - 5 ppm for hot tubs and a pH level of between 7.2 and 7.6. The ideal pH level is 7.4.
More Information
BrandPool Pro
Used InSmall Pools, Large Pools
Used ForBlack Spot Algae Control
Instructions for use1.Calculate the volume of Black Spot Algaecide needed as follows: 200 ml per 10,000 litres (2,200 gallons) of water. 600 ml per 30,000 litres ((6,600 gallons) of water. 1000 ml per 50,000 litres (10,998 gallons) of water. 2. Clean pool thoroughly, brush walls and floor with a stiff pool brush and vacuum to waste. 3. Adjust the pH between 7.0 - 7.2. 4. Continue to run circulation and filtration as normal. 5. Superchlorinate the pool using a sanitiser. 6. Wait 24 hours and then pour the calculated volume of Black Spot Algaecide near the algae. DO NOT ADD THE PRODUCT VIA THE POOL SKIMMER! 7. Adjust sanitiser levels accordingly and filter as normal. ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS. NEVER MIX CHEMICALS.
Write Your Own Review
You're reviewing:Pool Black Spot Algaecide (1 litre)