Pool Heat Pump 14.5kW Hydro-Pro - COLLECTION ONLY

  • Hydro-Pro Heat Pump suited for pools up to 75 m³ volume (75,000 L / 16,498 gal).
  • Dimensions: 36" L x 28" W x 37" H (91cm x 70.7cm x 94cm).
  • Heating capacity 14.5 kW. Flow rate 1,364 gal / hour.
  • Titanium condenser resistant to salt and chlorine.
  • Electronic controller with LCD display.
Hydro-Pro Pool Heat Pump 14.5kW heating capacity, for pools with up to 75 cubic metres volume. Eco-friendly, easy to install and operate, with quiet running. The most cost effective and efficient method of heating your pool and enjoy all year round swimming. Collection at our store only, please contact us.
Availability: Out of stock
Swimming Pool Heat Pump Hydro Pro type 22, vertical. "All seasons" model, it will heat your pool water and keep constant temperature when the air ambient is at -5 to 43 degrees Celsius.  With automatic defrost function, drain and flow switch and cabinet made from corrosion resistant ABS. Titanium heat exchanger resistant to salt and chlorine. With R410A refrigerant gas for an environmentally friendly operation. Quiet running with low sound scroll compressor and low noise fan. Easy to operate digital temperature control with LCD display. All functions are microprocessor controlled. Essentially working like an air conditioning unit but in reverse, the heat pump uses the ambient air temperature to excite a refrigerant enclosed within the unit. The temperature of the refrigerant is raised thus generating heat in the process. By diverting the flow from your pool recirculation pump and sand filter system, the circulating water collects the heat generated by the 'excited' refrigerant. As long as the unit is switched on heat will be provided all year round to the temperature you set. Full flow, with flow rate 6.2 cubic metres / hour (6,200 L / 1,364 gal per h). Heating capacity (A15/W25): 14.5 kW,  49,500 BTU/h  COP 4.2. Motor power 3.45 kW. Running current 15 amp. Power supply 220-240V. Air flow 3,500 cubic metres / hour. One fan, vertical direction, speed 650 RPM, power input 200 W. Noise level: 1m - 56 dB(A), 10m - 47 dB(A). Water inlet: 50mm (1.5 inches). Dimensions: 36 inches L x 28 inches W x 37 inches H (91cm L x 70.7cm W x 94cm H). Suited for pools up to 75 cubic metres volume (75,000 L / 16,498 gal). Accessories included: 4 x Anti-vibration base, 2 x Draining jet, 1 x Waterproof box, 1 x 10m Signal wire, 2 x Water drainage pipes, 1 x winter cover. Warranty: two years. NOTE: The heating capacity of your heat pump depends on the environmental - outside air - temperature. The heating capacity (kW) necessary to warm up your pool not only depends on the water quantity, but also position of the pool and heat pump and the degree of isolation for each. Another important consideration for outdoor pools is the desired heating time at the beginning of the pool season, when the outside temperature is not ideal for optimum performance of the heat pump. For best results a pool cover should be used (not included), as ~80% of heat is lost over night through the evaporation process. Also, a bypass kit should be used with every heat pump (not included). The Bypass kit disengages the water flow to the pump so the swimming pool water is still flowing but does not flow through the heat pump. This is necessary when cleaning the swimming pool using chemical products. Will allow winterising the heat pump without affecting the water flow to the swimming pool. This unit is designed to be installed in an outdoor location. Please consult a qualified electrician for advise and installation with an indoor pool.
More Information
Delivery2 to 4 working days
Heating Capacity14.5 kW
BTU per hour49,500
Maximum Pool Volume75,000 L / 16,498 gal
Flowrate per hour6,200 L / 1,364 gal
Motor Power3.45 kW
Compressor typeScroll
Controller typeElectronic
Write Your Own Review
You're reviewing:Pool Heat Pump 14.5kW Hydro-Pro - COLLECTION ONLY