Pool Heat Pump 8.2kW Hydro-Pro

  • Hydro-Pro Heat Pump suited for pools up to 40 m³ volume (40,000 L / 8,799 gal).
  • Dimensions: 41" L x 18.5" W x 28" H (105cm x 47cm x 71cm).
  • Heating capacity 8.2 kW. Flow rate 770 gal / hour.
  • Titanium condenser resistant to salt and chlorine.
  • Electronic controller with LCD display.
Hydro-Pro Pool Heat Pump 8.2kW heating capacity, for pools with up to 40 cubic metres volume. Eco-friendly, easy to install and operate, with quiet running. The most cost effective and efficient method of heating your pool and enjoy all year round swimming.

Availability: In stock

Excl. Tax: £1,287.46 Incl. Tax: £1,544.95
Hydro-Pro
Why order from Pool Pro?
1

Fast UK Delivery

2

Next working day up to 2pm

3

No Hassle Returns Policy

4

100% Secure Checkout

Description
Details
Swimming Pool Heat Pump Hydro Pro type 13, horizontal. "All seasons" model, it will heat your pool water and keep constant temperature when the air ambient is at -5 to 43 degrees Celsius.  With automatic defrost function, drain and flow switch and cabinet made from corrosion resistant ABS. Titanium heat exchanger resistant to salt and chlorine. With R410A refrigerant gas for an environmentally friendly operation. Quiet running with low sound rotary compressor and low noise fan. Easy to operate digital temperature control with LCD display. All functions are microprocessor controlled. Essentially working like an air conditioning unit but in reverse, the heat pump uses the ambient air temperature to excite a refrigerant enclosed within the unit. The temperature of the refrigerant is raised thus generating heat in the process. By diverting the flow from your pool recirculation pump and sand filter system, the circulating water collects the heat generated by the 'excited' refrigerant. As long as the unit is switched on heat will be provided all year round to the temperature you set. Full flow, with flow rate 3.5 cubic metres / hour (3,500 L / 770 gal per h). Heating capacity (A15/W25): 8.2 kW, 28,000 BTU/h. COP 4.4. Motor power 1.86 kW. Running current 9.1 amp. Power supply 220-240V. Air flow 2,800 cubic metres / hour. One fan, horizontal direction, speed 830~870 RPM, power input 120 W. Noise level: 1m - 52 dB(A), 10m - 43 dB(A). Water inlet: 50mm (1.5 inches). Dimensions: 41 inches L x 18.5 inches W x 28 inches H (105cm L x 47cm W x 71cm H). Suited for pools up to 40 cubic metres volume (40,000 L / 8,799 gal). Accessories included: 4 x Anti-vibration base, 2 x Draining jet, 1 x Waterproof box, 1 x 10m Signal wire, 2 x Water drainage pipes, 1 x winter cover. Warranty: two years. NOTE: The heating capacity of your heat pump depends on the environmental - outside air - temperature. The heating capacity (kW) necessary to warm up your pool not only depends on the water quantity, but also position of the pool and heat pump and the degree of isolation for each. Another important consideration for outdoor pools is the desired heating time at the beginning of the pool season, when the outside temperature is not ideal for optimum performance of the heat pump. For best results a pool cover should be used (not included), as ~80% of heat is lost over night through the evaporation process. Also, a bypass kit should be used with every heat pump (not included). The Bypass kit disengages the water flow to the pump so the swimming pool water is still flowing but does not flow through the heat pump. This is necessary when cleaning the swimming pool using chemical products. Will allow winterising the heat pump without affecting the water flow to the swimming pool. This unit is designed to be installed in an outdoor location. Please consult a qualified electrician for advise and installation with an indoor pool.
Item Specifics
Item Specifics
Barcode Number (GTIN) No
Delivery 2 to 4 working days
Product Code HP7018525
Brand Hydro-Pro
Associated Links No
Weight (kg) 63.0000
Heating Capacity 8.2 kW
BTU per hour 28,000
Maximum Pool Volume 40,000 L / 8,799 gal
Flowrate per hour 3,500 L / 770 gal
Motor Power 1.86 kW
Airflow Horizontal
Compressor type Rotary
Controller type Electronic
Reviews
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tags
Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Delivery Information

PLEASE NOTE:

We DO NOT deliver on Saturday or Sunday.
We DO NOT deliver on bank holidays.
We deliver on WORKING DAYS ONLY.
In order to receive items before the weekend, place your order by 2PM Thursday at the latest.

99% OF DELIVERIES ARRIVE NEXT WORKING DAY,
BUT WE DO NOT GUARANTEE OR REFUND DELIVERY CHARGES

See our list of categories, associated delivery times and delivery charges below:

Category Delivery Time Delivery Charge
POOL & HOT TUB CHEMICALS  Next working day  £6.95
POOL & HOT TUB ACCESSORIES  Next working day  £6.95
POOL & HOT TUB FILTER CARTRIDGES  Next working day  £6.95 
INTEX PRODUCTS  Next working day   £6.95 
PIPES & FITTINGS  Next working day  £6.95
OTHER POOLS 10 - 14 days Varies
OTHER PUMPS / FILTERS / HEATERS 10 - 14 days Varies
HOT TUBS In stock 1-4 weeks
In transit 4-6 weeks
Made to order 12 weeks
Varies.
Facebook Comments

To ask us a question about this product, please leave a Facebook comment below

You may also be interested in the following product(s)