- Aqua JET counter-flow system for swimming pools.
- Contains one Aqua JET counter flow system and one mounting plate.
- For in-ground partially in-ground swimming pools.
- LED lights and control of the swim jet accessible from the pool.
- Pump capacity 50mᵌ of water per hour.
A clever and fun pool accessory, the SwimJet 50 (50m³/h) creates a current in your pool, strong enough to swim against. Quiet and lightweight, can be used on any inground pool, but can also be used on above ground pools if additional support is provided.
Availability: Out of stock
Aqua-jet 50 is designed to provide a professional swimming experience. This basic unit is all set and ready to install on in-ground pools, just requires electricity connecting. The unit contains one Aqua JET counter flow system and one mounting plate for in-ground partially in-ground swimming pools. If the swim jet is to be installed above ground, it will require an extra stand (not included). The units have led lights making swimming at night more pleasurable. The lights and the control of the swim jet are accessible from the pool. Water is taken-in by a turbine pump through a grating located in the lower part of its inlet tube. Then the water is pumped by the turbine pump through a chamber and a mixing jet back into the swimming pool. Turbine pump operation is controlled by a pneumatic on/off push button located in the unit housing. The volume of air taken in by the jet is regulated by a rotary control. The submersed counter-flow lamp is turned on/off by a light switch. The counter-flow unit is almost maintenance free, however attention should be paid to the clarity/purity of the water in the pool. Voltage 230 VAC (single-phase) / 50Hz. Power imput 1,1 kW. Control system: air operated. Pump capacity 50mᵌ of water per hour. Jet tilt angle 60° / 60°.
|Barcode Number (GTIN)||None|
|Delivery||2 to 4 working days|
Write Your Own Review