Fibreglass Pool Korsyka 29'6" x 12'2" Complete Kit (Pastel Colour)
- One-piece-pool fibreglass laminate with steps for easy access and sitting.
- Size: 29'6"L x 12'2"W x 5'D (9m L x 3.7m W x 1.55m D).
- DIY pool set with professional equipment for filtration, heating and lighting included.
- No risk of leakage. Great resistance to freezing weather, UV and long term chlorine usage.
- Long lifetime, high energy efficiency and easy maintenance.
Availability: In stock
|Barcode Number (GTIN)||No|
|Installed How||Fully In Ground|
|Pool Wall Type||Fibreglass|
|Pool Wall Details||10 layers: Gel coat resistant to UV radiation and chemicals, Double anti-osmosis layer (Barrier coat, Skin coat), Vinylester resin + glass fibre mat 300 gr / m2, Vinylester resin + double layer of glass fibre mat 450 gr / m2, Woven roving, Vinylester resin + triple layer of glass fibre mat 600 gr / m2, Metal reinforcement with double layer of polyester resin and glass fibre, Top coat, Polyurethane foam (*Optional 40mm foam insulation layer available).|
|Length||9 m / 29 ft 6 inches|
|Width||3.7 m / 12 ft 2 inches|
|Depth||1.55 m / 5 ft|
|Capactity||51,615 L / 11,354 gal|
|Filtration & Pump Type||Mega V650 26" top mount sand filter|
|Skimmer Included||2 x Mega Skimmer 1.5" female thread|
|Steps / Ladder||5 Steps|
|Assembly Instructions||1. Prior to assembly, choose a location and dig a hole whose volume is a little larger than the size of the pool. 2. Prepare a concrete cast mix. Pour a cement and sand mixture about 10cm / 4” thick, or the cast, onto the bottom of the hole, then level the bottom. Sprinkle everything with water. 3. See the Cross-section measurements of the pool (product photos) to help you determine the size of the hole and amount of concrete cast. 4. Pour water into the pool up to the level of about 20cm / 8”. 5. Pour the cement and sand mix around the sides of the pool till the water and mix levels are the same. Pour water onto the mix so that the mix ideally adjusts to the pool shape. 6. Pour an additional 20 cm / 8” of water into the pool. 7 Repeat steps 5 and 6 until the pool is filled. It is best to fit the filter near the pool, in a well below the skimmer level. Before winter, leave the water level below nozzles so that no water remains in the filtration system. It is not recommended to empty the pool of water completely for winter. Warning: do not fill a pool standing free on the ground as water pressure against the pool walls may cause the frame to burst; before winter, leave water in the pool below where the nozzles are mounted. The seller is not liable for mechanical damage arising from improper operation of the pool. *Note: Additional pipes and fittings might be required depending on the pool location.|
We DO NOT deliver on Saturday or Sunday.
We DO NOT deliver on bank holidays.
We deliver on WORKING DAYS ONLY.
In order to receive items before the weekend, place your order by 2PM Thursday at the latest.
99% OF DELIVERIES ARRIVE NEXT WORKING DAY,
BUT WE DO NOT GUARANTEE OR REFUND DELIVERY CHARGES
See our list of categories, associated delivery times and delivery charges below:
|Category||Delivery Time||Delivery Charge|
|POOL & HOT TUB CHEMICALS||Next working day||£6.95|
|POOL & HOT TUB ACCESSORIES||Next working day||£6.95|
|POOL & HOT TUB FILTER CARTRIDGES||Next working day||£6.95|
|INTEX PRODUCTS||Next working day||£6.95|
|PIPES & FITTINGS||Next working day||£6.95|
|OTHER POOLS||10 - 14 days||Varies|
|OTHER PUMPS / FILTERS / HEATERS||10 - 14 days||Varies|
|HOT TUBS||In stock 1-4 weeks
In transit 4-6 weeks
Made to order 12 weeks
To ask us a question about this product, please leave a Facebook comment below
Out of stock
Out of stock