Pool and Hot Tub Multifunctional Chlorine Granules (5 kg)
- Easy to use, fast dissolving Multifunctional Chlorine Granules (5 kg).
- Highly effective pool and hot tub water sanitiser with added algicide and flocculant (clarifier).
- Ideal to maintain the pool or hot tub water in perfect condition and prevent algae growth.
- Trusted by the trade, used by professionals and commercial entities for over 20 years.
- Manufactured to the same specifications as other leading brands.
A top-quality sanitiser for swimming pool and hot tub water the Multifunctional Chlorine Granules (5 kg) contain algicide and flocculant (clarifier) for extra protection against algae growth.
Availability: Out of stock
One of the most effective chlorine products, the Multifunctional Chlorine Granules contain algicide and flocculant (clarifier) as well as stabilised Chlorine to maintain the water in perfect condition. Completely soluble and with little if any pH balance required, the granules should be dissolved in a clean plastic container of warm water. To ensure safe use of your pool, maintain a free chlorine level of between 1.5 - 3 ppm for pools or 3 -5 ppm for hot tubs and a pH level of between 7.2 and 7.6. The ideal pH level is 7.4.
|Delivery||Next working day (if order placed before 2PM Monday to Friday)|
|Barcode Number (GTIN)||5060149806661|
|Used In||Hot Tubs (Hard Shell), Hot Tubs (Vinyl), Inflatable Spas, Small Pools, Large Pools|
|Used For||Regular Sanitisation|
|Instructions for use||1. Test to check the chemical balance.2. To increase your chlorine level by 1ppm or mg / litre add: 2 grams per 1,000 litres (220 gallons); 10 grams per 5,000 litres (1,100 gallons); 20 grams per 10,000 litres (2,200 gallons); 120 grams per 60,000 litres (13,200 gallons). 3. Fill a clean plastic bucket with water and add the required dose of chlorine granules to a maximum of 100 grams per 10 litres of water and mix well. 4. Add the solution to your pool or hot tub near the water inlet with pump running. 5. Allow the chemicals to circulate for 2 - 3 hours then retest and repeat as necessary to achieve the correct sanitation levels. NOTE: As a general guide for small pools and hot tubs use a daily rate of 18 grams to 10,000 litres (2,200 gallons) of water. ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS. NEVER MIX CHEMICALS.|
Write Your Own Review