Pool and Hot Tub Chlorine Shock Granules (5 kg)
- Fast dissolving Chlorine Shock Granules (5 kg).
- Specially formulated to raise chlorine levels faster than ordinary sanitisers.
- Recommended for pool or hot tub water super-chlorination.
- Trusted by the trade, used by professionals and commercial entities for over 20 years.
- Manufactured to the same specifications as other leading brands.
Perfect for shock dosing pool or hot tub water, the Chlorine Shock Granules (5 kg) are an effective way to deal with water problems and restore clear, sparkling water.
Availability: In stock
Only 9 left
Highly effective water sanititser, recommended for super-chlorination, the Shock Chlorine Shock Granules contain 65% of available chlorine to raise chlorine levels more quickly than ordinary sanitisers. To ensure safe use of your pool, maintain a free chlorine level of between 1.5 - 3 ppm for pools or 3 - 5 ppm for hot tubs and a pH level of between 7.2 and 7.6. The ideal pH level is 7.4.
|Barcode Number (GTIN)||None|
|Used In||Hot Tubs (Hard Shell), Hot Tubs (Vinyl), Inflatable Spas, Small Pools, Large Pools|
|Used For||Green Water (Removing), Problem Solving, Weekly Boost to Sanitisation|
|Instructions for use||1. Test to check the chemical balance. 2. To increase your chlorine level by 1 ppm or mg / litre add: 2 grams per 1,000 litres (220 gallons); 9 grams per 5,000 litres (1,100 gallons); 18 grams per 10,000 litres (2,200 gallons); 100 grams per 60,000 litres (13,200 gallons). 3. Fill a clean plastic bucket with water and add the required dose of granular shock chlorine and mix well. 4. Add the solution to your pool or hot tub near the water inlet with pump running. 5. Allow the chemicals to circulate for 2 -3 hours then retest and repeat as necessary. ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS. NEVER MIX CHEMICALS.|
Write Your Own Review