Pool and Hot Tub Non-Chlorine Shock Granules (1 kg)
- Fast dissolving Non-Chlorine Shock Granules (1 kg).
- Specially formulated for shock dosing the pool or hot tub water without raising the chlorine level.
- Chlorine free shock treatment.
- Trusted by the trade, used by professionals and commercial entities for over 20 years.
- Manufactured to the same specifications as other leading brands.
An ideal chlorine free alternative for shock dosing pool or hot tub water, the Non-Chlorine Granules (1 kg) are an effective way to deal with water problems without raising the chlorine level.
Availability: In stock
Highly effective shock treatment, ideal for regular oxidation of pool or hot tub water, without raising the chlorine level. For use with all types of water sanitisers. To ensure safe use of your pool, maintain a free chlorine level of between 1.5 - 3 ppm for pools or 3 - 5 ppm for hot tubs and a pH level of between 7.2 and 7.6. The ideal pH level is 7.4.
|Barcode Number (GTIN)||None|
|Used In||Hot Tubs (Hard Shell), Hot Tubs (Vinyl), Inflatable Spas, Small Pools, Large Pools|
|Used For||Green Water (Removing), Problem Solving, Weekly Boost to Sanitisation|
|Instructions for use||1. Test to check the chemical balance. 2. To shock dose your pool or hot tub add: 15 grams per 1,000 litres (220 gallons); 60 grams per 5,000 litres (1,100 gallons); 120 grams per 10,000 litres (2,200 gallons); 720 grams per 60,000 litres (13,200 gallons). 3. Fill a clean plastic bucket with water and add the required dose of non chlorine shock and mix well. 4. Add the solution to your pool or hot tub near the water inlet with pump running. Do not place directly into the pool or hot tub as damage may be caused to finishes and liners. 5. Allow the chemicals to circulate for 2 -3 hours then retest and repeat as necessary to achieve the correct sanitation level. ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS. NEVER MIX CHEMICALS.|
Write Your Own Review