Automatic Pool Electric Cleaner - SharkVac XL Pilot
- Autonomous Pool Electric Vacuum Cleaner with programmable operating cycles.
- For use in all types of swimming pools shapes and surfaces, especially recommended for complex shaped pools.
- Excellent performance, high energy efficiency, great value for money.
- Suction cleans the pool floor, walls and waterline in 3 hours.
- Ergonomic caddy cart and reinforced power cord included.
Hayward Robotic Suction Cleaner - SharkVac XL Pilot, suitable for any type of swimming pool configuration, size up to 20ft x 39ft (6m x 12m). Economical and completely automatic for quick and efficient cleaning of the pool floor, walls and water line. Extremely durable, easy to install, use and maintain.
Availability: Out of stock
Hayward Robot Vacuum Cleaner type SharkVac XL Pilot, manufactured to the highest standards in design, performance and quality, to independently scrub, vacuum and filter your swimming pool. Universal pool cleaner: suitable for all for all types of bottom and walls (flat bottom, gentle slope, diamond shape, complex slope) and all types of surface (Vinyl, Shielded PVC, Gunite, Fibreglass). Especially recommended for complex shaped pools. Low electricity consume: it calculates the size of the pool and programs itself for the most time and energy efficient cleaning path. Adaptive Seek Control Logic (ASCL®) Microprocessor control optimizes cleaning routine for each individual pool size and shape. With three settings to adjust to all pool configurations. Operating at low voltage, poses no health risk (NOTE: never use the swimming pool while the electric cleaner is running). The cleaner is fitted with a turbine that sucks water into filtering panels that trap the dirt and debris. The filtered water is released directly back into the swimming pool. With handle for easy grip. Very easy to use: no hose, no bag, no installation needed, just connect it to a power socket, immerse it in the water and switch it 'On'. Autonomous (not connected to the pool hydraulic system), fast and very effective, will suction clean the entire pool floor including the walls and waterline in 3 hours. With Short cycle function: designed with a more efficient cleaning pattern allowing for quick cleanups between standard cycles while still reaching all areas of your pool. With choice of "floor" or "floor and wall" programme via a selection button. Simple Direct Drive design with highly reliable non-corrosive bearings. Easy top access to the cleaner 's high capacity filter unit - no need to turn the cleaner over, just remove the filter panel and rinse it with a garden hose. Technical information: Operating cycles: 2 hours (floor only), 3 hours (floor, walls and waterline). Electronic Self-Diagnostics, Overload Protection: Electronic Overload Monitoring with auto-shutoff. Out of water detection and retrieval function for "Californian-style" beach entry pool. PVC bristle-brush roller. Filtration area: 7,420 cm² (8 square feet). Speed of movement: 16.76 m/mn. Suction capacity: 17 m³ (3,739 gallons) water / hour. Filter media: Pleated Cellulose / Polyester Blend. Removable, re-usable pleated element cartridge. Moving Parts: Acetal / stainless steel. Waterproof sealing: Triple Redundant Radial Shaft Seals and O-ring. Motor housing: Sealed, Watertight, High Impact Polypropylene. Autonomy calculator included. Pump speed: 2,700 rpm. Motor unit: 24V / 3.5 amps. Power Supply unit with 'On' / 'Off' switch included: 24 V output, weight 3.8 kg. Electrical supply: 230 V, 50 ~ 60 Hz. Reinforced power cord included: Kevlar 16 m (52 ft) length, enough for an in-ground pool maximum size 6 x 12 m (20 x 39 feet). Ergonomic trolley included, to easily move and store the cleaner. Dimensions: 28 x 41 x 41 cm (11 x 16 x 16 inches). Warranty: 2 years.
|Delivery||2 to 4 working days|
Write Your Own Review